Procedure for Ultra Surface® SPRAY-TOP System

Step 1 - Surface Preparation
Step 2 - Crack Repair
Step 3 - Patching holes, spalls and low spots
Step 4 - Resurfacing prior to applying Spray-Top
Applying Spray_Top over stamped concrete
Applying Spray_Top prior to acid staining
Applying Spray_Top in a solid color over smooth floors
Applying Spray_Top over stencils or Modellos
Applying Spray_Top over foam shapes

Step 3: Patching Holes, Spalls, Low Spots and Deteriorated Areas After the surface preparation and crack repairs are completed, the next step is to patch any holes, spalls, low spots and/or deteriorated areas with Ultra Surface Polymer Concrete Patching Mix before starting the resufacing and texturing process.
Fig. 1 Patch Holes with Ultra Surface Polymer Concrete Patching Mix.		Fig. 2 Patch Spalls with Ultra Surface Polymer Concrete Patching Mix.
Fig. 3 Patch low spots with Ultra Surface Polymer Concrete Patching Mix.		Fig. 4 Patch deteriorated areas with Ultra Surface Polymer Concrete Patching Mix.
Fig. 5 Ultra Surface Polymer Concrete Patching Mix can be used for applications between 1/16th of an inch up to 2 inches deep and feathered to zero.		For more information about Ultra Surface Polymer Concrete Patching Mix call us toll free at (800) 232-8311 or click here to contact us by email.

Go To Step 1 2 3 4

Download PDF of Illustrated Instructions